AEM Series 2 EMS Plug-N-Play for VQswap.com VQ35DE Setup 30-6051

The AEM 30-6051 is originally made for Honda/Acura V6 Swap (J series) with sequential spark coil on plug. VQswap.com and Chase Bays have done all the dirty work to bring you a plug-n-play AEM EMS that works on your Nissan VQ35DE with cable driven throttle. A very simple internal modification to the EMS is done (NO soldering, just jumper removal. AEM WILL STILL WARRANTY THE EMS) by us to make the EMS read the VQ's unordinary CAM and CRANK signal. All you will have to do is plug it in with the Chase Bays Engine Harness OR PROPERLY modified VQ35DE engine harness (requires different ECU plugs, and various sensor plug changes) and upload the base map. This allows you to run sequential spark with the OEM coil packs, instead of wasted spark like we've seen others do in the past. 

AEM’s Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below. Like its predecessor, AEM’s Series 2 Plug & Play EMSplugs directly into a vehicle’s factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (2000,XP, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. Our new AEMTUNERsoftware is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.

Legal in California only for racing vehicles which may never be used upon a highway.

SERIES 2 KEY FEATURES

• Plugs directly into the factory harness. No rewiring necessary.


• Uses all the factory sensors.


• Includes start up calibrations.


• System is fully enabled and unlocked – Never pay for upgrades!


• Context sensitive help eases tuning process.


• Maps can be password protected by the tuner to prevent unauthorized usage or sharing.


• Runs on Windows-compatible software.


• 12 peak and hold injector drivers (Supra only).


• 8 direct-fire coil outputs.


• 16 general-purpose outputs.


• 8 definable switch inputs.


• 4 EGT inputs with fuel control.


• 1MB of internal data logging.


• Electronic boost control.


• Full idle control.


• Programmable traction control.


• Software definable knock control.


• Two step launch control.


• User configurable soft-cut rev limiters.


• Wet or dry nitrous control.


• Tune using new USB communication port or serial port.


• Works with all AEM gauges.

AEMTUNER SOFTWARE FEATURES

• Support Pane gives tuners context sensitive help and uses tuners’ actual calibrations to describe each function.


• Maps can be password protected by the tuner to prevent unauthorized usage or sharing.


• Internal conflict detection notifies tuner if obvious errors exist in assignment of inputs/outputs.


• Compare Calibrations allows tuners to graphically compare tables and maps for easy analysis.


• Workspaces are easily customizable and configurable.


• Colored tables and maps.