AEM ECT Sensor Kit
30-2011
$33.99
Overview:
- Accuracy: < 2°C / 3.6°F
- Operating Temp: -40C to 135C / -40F to 275F
- Resistive Range (Ω): See Table
- Dissipation Constant: 24 mW/°C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.
- Thermal Time Constant: 20-30 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
- Sensor Body Material: Brass
- Thread: 3/8"-18 NPT
- Hex Size: 3/4"
- Installation Torque: 20Nm / 15 ft-lbs
- Weight: 39.5g
- Supply Current: 5Vdc
- Elec. Termination: Weatherproof connector. Includes mating Connector with Flying Leads
Water / Coolant Temp Sensor Kit. 3/8"-18 NPT. Includes: Water / Coolant Temp Sensor, 3/8"NPT Aluminum Bung & Flying Lead Connector.
All AEM Sensors include a flying lead with a weather-tight seal and 12 inch insulated wires This is important since the correct connector will give you the most accurate voltage possible.